Automatic sensor flusher T-719-Big flush S-Super energy saving series
Applicable to public squat toilets with no water tank and no toilet seat cover.
No need for hand pressure, no need for pressing, no need for deliberate hand waving, just leave directly after using the toilet and it will flush automatically.8 years of free battery replacement, calculated based on CNS standard of 50,000 times per year.
- Continuous sensing for more than 7 seconds, 2 seconds to leave after use, 5-13 seconds to flush (adjustable). The indicator light flashes once when sensing.
- When the battery power is low, the indicator light flashes continuously to remind you to replace the battery. When the battery power is about to run out, the water is turned off and the system is shut down.
- Sensing distance 50-70 cm.
- With manual function.
- The horizontal angle of the photoelectric eye can be adjusted 360° and is suitable for left and right water inlets.
- Battery life: 6-8 years (50,000 times per year).
- Water supply pressure: 0.5kgf/cm²-7kgf/cm²
Technical Specifications
Installation method
- Floor, wall (any angle is acceptable).
Product Appearance
- Appearance material: Chrome plated
- Internal material: brass, plastic steel.
size
- Overall height: MAX-440mm (adjustable)
- Height from installation hole to toilet outlet: MAX-300mm (adjustable)
- Total length from wall to photocell: MAX190mm (adjustable)
- Applicable aperture: PF 1"
Sensing element
- Sensing distance: 20-30cm (hand measurement)
- Standby power saving mode
- Low Voltage LED Flasher (Battery Powered)
- When the battery runs out of power, turn off the water and shut down the system (battery type)
Solenoid valve specifications
- Water-saving solenoid valve assembly
Product packaging specifications
- Manual and automatic sensor flusher
- Wall flange cover
- Anti-theft screws
- Battery
- Nut(2pcs)
- Wall Flow Valve
- Water inlet pipe
- Muffler
- Outlet pipe
- Water outlet nut
- Fouling
Product installation diagram, instruction manual
