DOL UT-1301 In-wall sensor faucet for washbasins
- Can replace OVO AT1012
- Replacement for TOTO TLE26010P, TLE25010P, and TLE24010P
- The water flow is activated by sensing the sensor; remove your hand to turn off the water. The water will automatically turn off after one minute of continuous flow.
- When the battery is low, the LED light flashes to remind you to replace the battery.
- When the power is about to run out, the water will be turned off and the system will shut down.
- Sensing distance is within 10 centimeters.
- Battery life: 2-3 years (based on 50,000 cycles per year).
- Water supply pressure: 0.5 kgf/cm² - 7 kgf/cm²
- Operating water temperature: 1℃-60℃
- Optional UT adapter OVO AT1012 adapter
- Optional UT adapters: TOTO TLE26010P, TLE25010P, TLE24010P
Technical specifications
Installation method
- Embedded basin
Product appearance
- Exterior material: chrome plating
- Internal material: Brass
size
- Overall length: 160, 220mm
- Suitable basin hole diameter: 35mm
sensing element
- Sensing distance: 10-12cm (measured manually)
- Standby power saving mode
- Low-voltage LED flashing device (battery-powered)
- When the battery runs out of power, it will shut off the water and the system (battery-powered).
Solenoid valve specifications
- Diaphragm water hammer valve assembly
- Water-saving solenoid valve assembly
- Built-in filter
Supported power specifications
Battery specifications
- Size 3 alkaline batteries (4 pieces)
- CR-123A lithium batteries (2pcs) and battery case (1pcs)
Plug Specifications
- Transformer AC110V to DC6V
- Transformer AC220V to DC6V
Product Packaging Specifications
- Sensor-activated faucet
- TOOT-OVO adapter wall mount
- The solenoid valve has a built-in filter.
- Transformer or battery
- 30cm steel wire hose (hot and cold water)
- (Hot and cold water) check valve
- (Optional Accessory) Triangle Valve
Videos, certifications
