Two-stage automatic sensor faucet T-625S
- The water will flow out once it senses, and it will turn off the water again. After 3 minutes of continuous water flow, the water will be automatically turned off.
- Sensing distance is within 10 cm.
- When the battery is low, the LED light flashes to remind you to replace the battery.
- When the power is about to run out, the water is turned off and the system is shut down at the same time.
- Battery life: 6-8 years (50,000 times per year).
- Water supply pressure: 0.5kgf/cm²-7kgf/cm²
- Use water temperature: 1℃-60℃
Warm and cold
Technical Specifications
Installation method
- Countertop
Product Appearance
- Appearance material: Chrome plated
- Internal material: Brass
size
- Applicable basin hole diameter: 20mm-40mm
Sensing element
- Sensing distance: 10-12cm (hand measurement)
- Standby power saving mode
- Low Voltage LED Flasher (Battery Powered)
- When the battery runs out of power, turn off the water and shut down the system (battery type)
Solenoid valve specifications
- Diaphragm type water hammer valve assembly
- Water-saving solenoid valve assembly
- Built-in filter
Supported power specifications
Battery Specifications
- AA alkaline battery (4pcs)
- CR-123A lithium battery (2pcs) and battery case (1pcs)
Plug specification
- Transformer AC110V to DC6V
- Transformer AC220V to DC6V
Product packaging specifications
- Two-stage induction faucet
- Outlet pipe
- Fixing accessories
- 50cm steel wire hose
- Anti-water hammer solenoid valve with built-in filter
- Transformer or battery
- (Hot and cold water) 30cm steel hose
- (Hot and cold water) Check valve
- (Optional accessories) Triangular valve
- (Additional purchase) 4" decorative baseboard
Product installation diagram, instruction manual
