Hot and cold adjustment sensor faucet T-818R-Hot and cold adjustable version
- The water will be automatically turned off after one minute of continuous water flow.
- With adjustable hot and cold functions and anti-scalding device. (The highest temperature can be adjusted to 40 degrees)
- When the battery is low, the LED light flashes to remind you to replace the battery.
- When the power is about to run out, the water is turned off and the system is shut down at the same time.
- Sensing distance is within 17 cm.
- Battery life: 2-3 years (50,000 times per year).
- Water supply pressure: 0.5kgf/cm²-7kgf/cm²
- Use water temperature: 1℃-60℃
- Water saving label
Warm and cold: Hot and cold countertop temperature control
Technical Specifications
Installation method
- Countertop
Product Appearance
- Appearance material: Chrome plated
- Internal material: Brass
size
- Overall height: 135mm
- Distance from installation hole to water outlet: 130mm
- Applicable basin hole diameter: 35mm-40mm
Sensing element
- Sensing distance: 14-16cm (hand measurement)
- Standby power saving mode
- Low Voltage LED Flasher (Battery Powered)
- When the battery runs out of power, turn off the water and shut down the system (battery type)
Solenoid valve specifications
- Diaphragm water hammer valve assembly
- Water-saving solenoid valve assembly
- Built-in filter
Supported power specifications
Battery Specifications
- AA alkaline battery (4pcs)
- CR-123A lithium battery (2pcs) and battery case (1pcs)
Plug specification
- Transformer AC110V to DC6V
- Transformer AC220V to DC6V
Product packaging specifications
- Automatic sensor faucet (manual temperature adjustment)
- Fixing accessories
- 50cm steel wire hose (hot water hose)
- Water hammer solenoid valve with built-in filter (2pcs) - one for hot and cold water
- Transformer or battery
- Check valve (2pcs) - one for hot and cold water
- (Optional accessories) Triangle valve (2pcs)
Technical Specifications
